Fiber Media Converter usage :
Fiber Transceiver with the installation of fiber-optic
transceiver into a single-mode fiber transceiver and multi-mode
fiber transceiver two, According to the different optical fiber
connector, can be divided into SC fiber connector Transceivers
and ST fiber connectors transceiver. Fiber Transceiver Based on
the above features can be divided into the following types : 1000M
(double optical fiber transceiver mouth) 10 / 100M (with a Fast
Ethernet fiber transmission signals) in the real network application,
Under the specific circumstances whether or not there is fiber-optic
equipment, can use a fiber transceiver or two fiber transceiver
to achieve between the different devices connected.
Generally
have the following : use of a link between two switches 2, a connecting
switches and a network server 3. connecting a hub and a four workstations,
connecting a fiber-optic equipment and a hub in the use of fiber
transceiver connecting different devices, attention to the use
of different ports.
1,
the fiber transceiver to 100BASE-TX equipment (switches, hubs)
Connections : Twisted-pair confirmed the maximum length of more
than 100 meters; Twisted-pair connecting one end of the Fiber
Transceiver with RJ-45 I (Uplink mouth), Another side to 100 BASE-TX
equipment (switches, hubs) RJ-45 I (general population).
2,
the fiber transceiver to 100BASE-TX equipment (LAN) connectivity
: Twisted-pair confirmed the maximum length of more than 100 meters;
Twisted-pair connecting one end of the Fiber Transceiver with
RJ-45 I (100BASE-TX mouth), Another side to the card RJ-45. 3,
fiber transceiver to 100BASE-FX Connections : confirm the length
of fiber equipment will not exceed the distance; Fiber Optic Transceiver
end even of SC / ST connectors Another BASE-Link 100-FX equipment
SC / ST connectors.
Many
users in the use of fiber transceiver found that : As long as
the length of the fiber single-mode or multi-mode fiber optical
fiber can support the greatest distance can be used normally.
In fact, this is a wrong perception, this understanding only in
the connected devices are full-duplex when the equipment is correct,
When the equipment is half-duplex, fiber transmission distance
has certain limits. When using fiber transceiver connecting terminal
equipment (such as workstations, switches, routers or terminal),
the following situations :
1.
Equipment A and B equipment through a fiber transceiver link up
with a B equipment optical interface :
A
model equipment equipment X-Y B full-duplex terminals Terminal
2 ~ 100 meters 20/40/60 km final half-duplex terminals X - "100
meters = Y + X" = 360 meters a half-duplex type Hub terminal
X "X = 100 m + Y" = 2 60-meter half-duplex 2 Hub terminal
X "X = 100 m + Y" = 308 m 2. Equipment A and B equipment
through Fiber Transceiver two link up the equipment no optical
interface B :
A
model equipment equipment B X Y Z full-duplex terminals Terminal
2 ~ 100 meters 20/40/60 km 100 meters semi-double the X-terminal
terminal "X = 100 m + Y + Z" = 260 meters Z "=
100 meters above for the installation and use of fiber Transceivers
the basic methods and attention to the matter, the use of fiber
transceiver, According to your specific environment corresponding
to the choice of products to use the correct port connectivity,
and to determine the correct length of fiber, Thus, the actual
use will reduce a lot of unnecessary trouble, it will smooth the
completion of the network you build.
For
more information : Please send
us your Enquiry & Register as Reseller
Download
the Free Guide: Four Steps to Intelligent Acceleration
Discover how to make your key WAN applications fly! Register now
for Four Steps to Intelligent WAN Acceleration Guide to discover
how to:
Precisely
determine application and network performance
Create policies that protect business-critical application performance
Apply application-intelligent acceleration technologies
Register
to Link to Download the Four Steps to Intelligent Acceleration
Guide
